3TLX
Overview
The 3TLX series gauging transducers are manufactured to a superior mechanical standard, ensuring low non repeatability and a measurement performance difficult to match in this type of product.
Photograph
Basic Specifications
|
Part Number |
Calibrated Range inch (mm) |
Total Travel inch (mm) |
Sesitivity m V / V / mm |
|
3TLX10 |
± 0.040 (1.0) |
± 0.176 (4.40) |
73.0 |
|
3TLX15 |
± 0.060 (1.0) |
± 0.176 (4.40) |
73.0 |
|
3TLX20 |
± 0.080 (1.0) |
± 0.200 (5.00) |
36.5 |
|
3TLX50 |
± 0.200 (1.0) |
± 0.424 (10.6) |
7.3 |
Features
-
Precision manufacture
-
High accuracy
-
Half bridge
-
CE marking
-
Repairable
Connectivity
These transducers are supplied with two meters of black oil-resistant cable terminated into a five-pin 270 degree DIN connector as standard. Alternative connectors may be specified at the time of ordering.
Calibration
Calibration components are mounted on a small PCB within the connector housing, this PCB can be replaced by a network of components should custom connectors be required. Calibration is carried out using a computer controlled process and high-precision optical encoders. A calibration certificate can be supplied on request.
Detailed Specifications
|
Transducer type |
3TLX**A = axial cable exit |
|
|
3TLX**RV = vacuum retract |
|
|
3TLX**RP = pneumatic push |
|
Configuration |
half bridge |
|
Mechanical travel |
[see specifications on previous page] |
|
Calibrated range |
[see specifications on previous page] |
|
Sensitivity (standardized) |
[see specifications on previous page] |
|
Connector |
DIN 5 pin 2700 or as requested |
|
Linearity |
better than 0.3% of total stroke bsl |
|
Repeatability |
0.02 um |
|
Residual at zero |
less than 3 mV |
|
Carrier frequency |
10 kHz and 13 kHz |
|
Energising voltage |
1 - 10 V rms |
|
Bearing type |
linear ball |
|
Minimum life |
10 million cycles |
|
Moving mass |
4 grams |
|
Anti-rotation |
maximum 1 degree over full travel |
|
Temperature range |
+14º F to +149º F storage and service |
|
Mounting position |
any position |
|
Ball tip |
Special tip M2 with 2 mm tungsten ball |
|
Gaiter material |
Viton rubber green |
|
Cable |
Black 4 core screened 2 m |
|
Spring force |
0.4 N at electrical zero |
|
|
(option 0.25 - 4 N) |
|
Pre-travel |
Adjustable |
|
Protection class |
IP64 |
|
Service |
Repairable |
PDF ENGEENERING SPECS
PDF Engineering Specs: 3TLX
